Stump Solved: Unlocking tree stump removal with 1 common household ingredients

It’s best to say goodbye to a pesky tree stump, as its almost always intact root system can produce new growth and negate the initial intent to cut down the unwanted tree. Additionally, this method can reduce the risk of trips and falls, increase the appeal of your garden, and simplify yard maintenance. While there are various methods of getting rid of tree stumps, such as using a chainsaw or stump grinder, the price tag can often reach staggering heights, making it unaffordable for many homeowners. But there is an economical and environmentally responsible way to remove stumps from your garden: Epsom salts.

Although magnesium sulfate or Epsom salt are frequently used to enhance plant nutrition, a large dose can be fatal to an unattractive plant stem. By completely absorbing all the sap of the stump, including its roots, it accelerates the decomposition of the stump. Its affordable price and easy availability make it a cost-effective partner for your landscaping projects. No more arboreal isours – either add salt to holes dug into the base of the tree or soak in a salt solution.

Read more: 14 Tools That Will Take Care Of Almost Any Problem In Your Yard

Here are 2 Methods to Remove A Tree Stump

---

Using The Drilling Method

To get started, gather the following materials: a shovel, tarp, water, Epsom salt, a drill or ax with a large bit. Drill several one-inch-wide holes in the surface of the stump along its aerial roots. Make sure each hole is at least three to four inches apart. Although six holes are plenty, larger stumps may require more. Make sure your drill bit is inserted about eight inches down to penetrate the salt deeply. Alternatively, you can hollow out the tree stump with an axe.

Next, immediately fill the drilled hole with ¾ of an inch of Epsom salt, then top it up with water to keep the salt wet. Then use wax to seal the holes. To prevent regrowth of roots and allow the salt to do its job of rotting the trunk, cover the remainder of the trunk with a non-porous tarp and keep it out of the sun and rain. Repeat the process every three weeks until the stump is dead and removed with a shovel.

Employing The Soaking Method

The soaking approach works well for removing tree stumps. Put water and Epsom salt in a bucket and mix 1:2. It usually takes about one gallon of salt and two gallons of water to soak the base of a tree. Apply this mixture evenly to the base of the plant and its largest exposed roots.

Once the stump is completely wet, cover it with a plastic sheet or an opaque tarp and then add mulch on top to reduce its weight. You can also apply a high-nitrogen fertilizer around the base of the tree trunk to speed up the decomposition of the tree trunk. At least once a week, repeat this process and chip the wood as it breaks. Finally, after it is completely dry, remove every last trace of the stump, paying special attention to the roots. Once the stump is removed, you can turn the area into a new area by filling the area with dirt and planting grass or flowers.

READ | Why Do Some Trees Have White Paint on Them?

READ | When Trees Are Painted: Exploring 8 Affect and Artistry

---